LED power supply 200W 12VDC - mains adapter

What power output do I need? Please use our calculator to find out:

Power-supply-calculator

Model Length/Variant Quantity
 

 
Power supply Too much for one power supply

This is how it works: The power that the mains adapter has to supply is calculated by adding the individual power ratings (watts) of the intended LED lighting bars and then adding a further min. 10% reserve. The correct mains adapter is then the next larger model. Always allow for a minimum 10% power reserve in order not to overload the mains adapter! (Our calculator takes this into account automatically!)

For the avoidance of any misunderstandings: The mains adapters themselves do not consume 30, 75 or 150W of power! But they are capable of delivering this power! Power consumption depends only on the connected LEDs and the efficiency of the mains adapter! In standby (i.e. when the power supply unit is only plugged into the socket, not connected to LEDs or in operation) the consumption is close to zero.

Product information "LED power supply 200W 12VDC - mains adapter"

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

An extremely high-quality LED switching mains adapter that sets standards in quality and performance. This excellent LED power supply puts the usual plastic desktop power supply in the shade and is therefore our clear buy recommendation!

Special characteristics:

  • High-quality manufacture
  • Solid construction in an aluminium housing
  • Durable
  • High efficiency
  • Low heat generation

These mains adapters* are compatible with all lighting control systems*, dimmers* and distributors in our range of products.

*Please observe the maximum connected load in each case!

 

 

Technical data:

  • Input voltage 85 ~ 265V AC
  • Output voltage: 12V DC
  • Output power: Depending on model: 35W to 264W
  • Frequency: 47 ~ 63Hz
  • Efficiency >90%
  • Aluminium housing, IP67
  • Protected against short-circuit, overload
  • Cooling by natural convection 
  • Operating temperature from -40 to + 70°C 
  • Cable lengths:
    • 230V input 50cm with an EU Schuko plug,
    • 12V output 50cm (connection as specified in the order)
  • Dimensions and weight:

Model

Dimensions

Weight

35W (2.92A)

200x42x34mm

650g

100W (8.33A)

181x67x37mm

85 0g

150W (12.5)

210x67x40mm

1000g

200W (16.67A)

235x68x40mm

1300g

264W (22A)

234x98x40mm

1750g

 

Difference: Desktop mains adapter vs. switching mains adapter

Switching mains adapter: Premium mains adapter of good quality, solid construction in an aluminium housing, the highest efficiency, low temperature, very long service life

Desktop mains adapter: Lower-priced mains adapter of ordinary quality, compact design, plastic housing, high temperature, higher probability of failure

Videos

10 of 168 reviews

4.9 out of 5 stars


92%

7%

1%

0%

0%


Leave a review!

Share your experiences with other customers.


2 - 10 of 18 reviews

29 August 2023 09:18

leicht anzubauen

robuste Bauweise

14 March 2024 21:17

Netzteil 150W

Sehr gut verarbeitet, sehr wertiger Eindruck. Netzteil gibt keine störenden Geräusche von sich.

26 June 2023 15:48

Gute Qualität, wird nicht zu heiß, alles

Gute Qualität, wird nicht zu heiß, alles gut 👍

20 March 2024 12:06

Hochwertig, leise und werden nicht zu heiß.

Hochwertig, leise und werden nicht zu heiß. Pfeifen nicht wie die JBL Netzgeräte nach kurzer Zeit. Preis Leistung passt.

14 February 2023 18:11

Beste Qualität, Leistungsstark

Lässt keine Wünsche offen, genügend Leistungsreserven, Stecker passend zur Steuerung

29 March 2024 16:55

sehr gutes Preis/Leistung Verhältnis

sehr gutes Preis/Leistung Verhältnis

25 December 2021 11:38

Sehr gut

Das Teil funktioniert einwandfrei. Ich habe es gekauft, nachdem das Vorgängermodell nach 6 Jahren den Geist aufgegeben hat. Der Suppert hat mir bei der Ursachenfindung umgehend geholfen. Es wurde superschnell geliefert. Die Firma und ihre Produkte sind eionfach Spüitze.

7 April 2021 23:17

Schnelle Lieferung, alles Top funktioniert !!!

26 October 2020 13:05

macht was es soll, alles super

17 July 2020 14:22

Hochwertig, kein billig Plaste Müll aus China

Hochwertiges verarbeitet, zumindestens das was ich von außen sehen kann. Angemessenes Gewicht, also wir wohl auch innen ordentliches Material drinn sein. Wird nicht so heiß, wie andere chinesische Modelle wo man sich die Finger verbrennen kann. Tut seinen Dienst und würde ich jederzeit wieder kaufen.

Powerful LED light control in XL version

The SunRiser 2XL with a total power of up to 240W/20A it provides more power than ever before.

Customers also bought

M2.9x4.5mm screw
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece
Product number: S5-2451

€0.06*
Retaining bridge (spare part)
Compatible with deLUX/pure cover Adapter profiles Lamp housing Price/piece
Product number: S2-0107

€2.99*
M2.9x9.5mm screw
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece
Product number: S5-2951

€0.08*
No longer available
SunRiser 8 dimming control and daylight simulation

For the ideal lighting scenario: From a gentle sunrise, through the powerful midday sun, to a picturesque sunset. Add moonlight, clouds, or even a thunderstorm as you wish. With user-friendly software, realizing your vision is simple and limitless.

Product number: 158-00

€249.99*
4mm spacer
Used in the fastening of the LED bars for creating an offset between the LED bars and the mounting surface to provide better ventilation. Compatible: M2.9, M3 screws, eco+ mounting clip Material/colour: Polystyrene, black Price/piece
Product number: S4-0104

€0.08*
Connections for water cooling / heat recovery

Silicone hose for supplying the water cooling.

Product number: 170-3m
Version

Variants from €2.99*
€6.99*
New
SunRiser 6 dimming control and daylight simulation

Bring your aquarium to life! Discover gentle sunrises and sunsets, individualized scenarios, and energy-efficient control in one device.

Product number: 156-00

€149.99*
Adapter cable 12VDC PWM for mini pump
This is a spare part, this adapter cable is already included in the scope of delivery of the 12VDC mini pump. This adapter cable is absolutely necessary for operating the 12VDC mini pump (item 175-500) on a light control unit (SunRiser 2+, 2XL, 6, 8 or SIMU-LUX). When connecting, it is essential to observe the polarity of the connection, otherwise there is a risk of immediate defect. (Red=PLUS, Black=MINUS) It is not possible to operate the CO2 valve and the mini pump at the same output of a light control unit and this can lead to a defect in the light control unit.
Product number: S1-0203

€4.99*
90° connector for mini pump
For connecting the hose to the 12V mini pump. Not compatible with other pumps.
Product number: S4-0050

€2.59*

Similar products

Power supply for SunRiser-High-Power-Solution

The High-Power-Solution allows a connected load of up to 480W (-10%) per channel on one SunRiser.

Product number: 255-120
Power

€51.99*
Extension cable sold by the meter.
Rubberized premium cable, 4-core, for custom extension of the connection cables of our two-color PRO² LED bars.
Product number: 160-04
Version

Variants from €1.49*
€1.99*
Extension cable sold by the meter.
Rubberized premium cable, 2-core, for custom extension of the connection cables of our single-color eco+ and PRO² LED bars.
Product number: 160-02
Version

€1.49*
LED power supply 100W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Product number: 250-100
Power

Variants from €37.99*
€47.99*
LED power supply 35W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Product number: 250-035
Power

€37.99*
Connector for extending cables

Heat-shrink solder connector for extending connection cables: Connect - solder - insulate - seal - in one simple working process.

Product number: 161-04
Version

Variants from €1.69*
€2.99*
Broadband mains filter with overvoltage protection EMZ 504

For broadband high-frequency interference suppression of electrical loads with earth contact connection.

Product number: 260-00

€53.99*
Spiral hose 100cm black

For easy bundling and guidance of cable lines.

Product number: 167-BK
Colour

€1.99*
LED power supply 150W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Product number: 250-150
Power

Variants from €37.99*
€57.99*
Connector for extending cables

Heat-shrink solder connector for extending connection cables: Connect - solder - insulate - seal - in one simple working process.

Product number: 161-02
Version

€1.69*
LED splitter - distributor: up to 6 LED lighting bars connected to ONE mains adapter

This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).

Product number: 120-6

€13.99*
Adapter for connecting to third-party products

Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.

Product number: 130-0000
Item

From €2.99*

Customers also viewed

LED splitter - distributor: up to 6 LED lighting bars connected to ONE mains adapter

This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).

Product number: 120-6

€13.99*
Save energy!
Save energy!
Find out how LEDterraristik lighting contributes noticeably to saving energy.