Lamp hanging freely above the aquarium, fastened by steel suspension wires to the ceiling.
€15.49*
Available, delivery time: 1-3 days
Lamp housing supported as a suspended lamp.
Suspended lamp = lamp hanging freely above the aquarium, fastened by steel suspension wires to the ceiling.
Characteristics:
- Material: Stainless steel, zinc plated
- Wire length 150cm, adjusted using a quick-release clamp, if required
- The suspension wires are attached to the locating grooves in the housing
- The distance between the wires is flexible and can be freely chosen
- The quick-release clamp allows the lamp housing to be removed in just a few simple steps (e.g. for major maintenance work on the aquarium).
Scope of supply:
- Steel wire system with two suspension wires incl. screws with dowel.
Tip:
- We recommend 3 or 4 suspension wires in the case of lamp housings connected together to form a total length of more than 200cm.
Videos
Login
8 April 2019 12:06
Top Qualität
Funktion und Design sind sehr gut.
31 August 2017 09:11
Aufhängung made easy :-)
Eine kleine Bedienungsanleitung wäre noch nett gewesen aber die Erklärung erfolgte innerhalb eines Tages. Selbsterklärender Einbau, absolut easy going. Was sich mir nicht erschloss wie ich die Lampe wieder nach unten bekomme wenn sie zu hoch hängt. Die obere Führung eindrücken und auch das geht super einfach. Danke für die Erklärung! Ich werde glaube ich noch viel Spass damit haben.
26 February 2023 19:53
Sehr gut
Einfache Montage Sieht gut aus und die Länge ist ausreichend für alle Dekenhöhen.
29 December 2022 16:25
Hier Kaufe ich wieder !
Alles gut.
14 February 2023 18:00
Top
Gut verarbeitet, perfekt Abgestimmt auf das Gehäuse. Variable Verstellmöglichkeiten, pfiffige Deckenbefestigung
20 December 2022 23:08
Praktisch und gute Qualität
Einfache Installation und hochwertig verarbeitet. Intuitiv anzubringen
3 December 2020 10:53
Super
22 November 2020 10:02
sehr gut
Läst sich leicht installieren, passt perfekt.
Customers also bought
For easy bundling and guidance of cable lines.
High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)
This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).
Similar products
Connect two lamp housings next to one another
Supported on the cover plate or glass struts on the aquarium, and between these, depending on the cover and the aquarium.
Supported on the cover plate or glass struts on the aquarium, and between these, depending on the cover and the aquarium.
So you can be sure of the quickest possible start with your new lighting!
Side-mounted lamp = supported on the sides (glass edges) of the aquarium.
Unique lamp housing - individually and flexibly adjustable to your needs.
Unique lamp housing - individually and flexibly adjustable to your needs.
In deviation from the standard, this article can be cut to length according to individual customer requirements.
Additional holding bridges for individual mounting of several (shorter) LED bars for flap aquarium cover, lamp housings and adapter profiles
Side-mounted lamp = supported on the sides (glass edges) of the aquarium.
Side-mounted lamp = supported on the sides (glass edges) of the aquarium.
